CUPLOK modular scaffolding

Assembly instruction

Want to know the cost of rent?

Versatility

Cuplok is a universal system for constructions of any complexity. It is used as supporting scaffolding for monolithic or prefabricated reinforced concrete structures, as well as on facades with a complex configuration.

Uniqueness

A unique design element of Cuplok is a cup system at a distance of 0.5 m from each other, which makes it possible to quickly and firmly connect the diameters in all directions and at any angle.

Speed

From 250 to 300 sq. M. facade scaffolding for 4 workers per shift, from 8 to 13 cubic meters. supporting or working scaffolding for 1 worker per hour.

CUPLOK system can be used as a support system for monolithic or prefabricated reinforced concrete structures, and for the creation of large working platforms and movable and stair towers.

CUPLOK system consists of vertical props, horizontal joists, diagonal braces, adjustable heels, crowns and other accessories.

The constructions are assembled as separate elements joined together via vertically and horizontally oriented special node elements. 

Due to unique method of attaching props to horizontal units through a special fastener, and a large range of components and their sizes, the system represents an answer to complex scaffolding and supporting structure needs.

CUPLOK system is manufactured of S355 structural-grade steel (hot galvanized) described in EN10025 European standard. Its minimal yield strength is 355mPa (millipascal), minimal breaking stress is 510 mPa. It is 20% lighter than the traditional steel. 

Pole load is up to 74 kN due to rigidity of connection unit and use of high-hardness steel. However, the profile of tubular details is similar to that of standard scaffolding. Bearing capacity does not depend on the construction height: is it up to 100 m for working scaffolds and up to 20 m for supporting ones.

CUPLOK system features :

Props

With the tip: 100 | 200 | 300 cm

With no tip:  100 | 130 |180 cm

Joint Interval 50 cm | 4 point per a nod
Anti-corrosive treatment Hot galvanizing  
Platform types Steel platforms | Wooden boards
Load Up to 74 kN per a rack
Application Facades | Bodies | Towers | Staircases | Mobile towers| Supports

The unique element of Cuplok construction is a system of cups located with 0.5 m spacing, which gives a possibility to connect crossing elements at any angle and in all directions. The uniqueness of this cup-joint is in that this system can resist bending moment. To joint parts together it is enough to blow them one time with the hammer. 

The unique element of Cuplok construction is a system of cups located with 0.5 m spacing, which gives a possibility to connect crossing elements at any angle and in all directions. The uniqueness of this cup-joint is in that this system can resist bending moment. To joint parts together it is enough to blow them one time with the hammer.

The system of components fast joint gives a possibility to reduce costs and installation time. It makes possible for four workers to assemble from 250 to 300 m2 of facade scaffolding per a shift or for one worker to assemble from 8 to 13 m3 of supporting or working scaffolding per hour;

It is equally appropriate to be used as a supporting construction or for an access provision. Appropriate for facades with complex geometry.

CUPLOK is the most copied scaffolding system in the world – we do not recommend mixing up the original CUPLOK system with its fake version. Ensure that the offered CUPLOK system is original.

Calculate the cost of rent for your project?

How we are working?

1

Leave a request on the website or by phone

2

We make the calculation of the necessary equipment

3

We conclude an agreement and solve financial issues.

4

We provide technical documentation: installation diagrams and specifications

5

We send equipment to your facility

6

We accept equipment after the lease term

Our service for renting or selling scaffolding

Standard service package

  • Project calculation
  • Installation diagram and specification
  • Operating Instructions
  • Consultation and training in the operation and installation of equipment
  • Providing technical support at the construction site

Extended service package

  • Everything included in the standard package
  • Delivery and forwarding
  • Transfer and acceptance of equipment at the facility
  • Installation supervision
  • Installation and dismantle of the scaffolding

Why choose us?

Always in stock

Do you have a very large project? We will fully provide the necessary equipment for facilities of 5000 m2 or more.

Everything is working properly and reliably.

We carefully monitor the maintenance of our equipment, therefore, it is always serviceable and of good quality.

Without intermediaries

We are official representatives and directly cooperate with manufacturers of scaffolding.