Radial formwork RONDA
Reliability
High-quality metal profile, special flexible plywood allows for monolithic work with a working pressure of 60kN/m2.
Quality
The system of special rods allows you to set the radius with high accuracy, and high-quality moisture-proof plywood ensures the best quality of concrete surfaces.
Manufacturability
The following features of the Ronda system provide high adaptability for monolithic work on radial walls.
The following features of the Ronda system provide high adaptability for monolithic work on radial walls.
RONDA is a well-established radial wall formwork system used for curved sections and round monolithic forms. This is a radial formwork with an adjustable radius, which consists of ready-to-use formwork elements.
The radius of the formwork can be adjusted at the work site using the built-in screw shrink discs. It is possible to install any radius greater than 4.0 meters.
| Panel Height | 150 | 200 | 300 cm |
| Width of outdoor panels | 250 | 128 cm |
| Width of interior panels | 240 | 123 cm |
| Molding surface | Plywood 14 mm |
| Radius range | 5,50-35,00 m (inside) |
| Corrosion protection | Hot dip galvanizing of all steel profiles and parts |
| Montage/demontage | t = 0,3 - 0,6 h/m2 |
| Maximum item weight | Outdoor element 300х250 = 367 kg |
Calculate the cost of rent for your project?
Why choose us?
Always in stock
Do you have a very large project? We will fully provide the necessary equipment for facilities of 5000 m2 or more.
Everything is working properly and reliably.
We carefully monitor the maintenance of our equipment, therefore, it is always serviceable and of good quality.
Without intermediaries
We are official representatives and directly cooperate with manufacturers of wall formwork and slab formwork.