Timber formwork Comax

With a wide range of panels and a small number of components, the COMAX system is the ideal solution to facilitate and speed up formwork.

The COMAX system is suitable for the construction of all types of vertical concrete structures at a construction site.

COMAX steel frame formwork is available in both painted (powder coating) and galvanized versions, in 5 heights and 9 widths. The system requires only 2 tie rods in height. All panels have horizontal ribs with holes for drilling every 5 cm, this allows you to use any standard panel as a universal panel. You can drill a surface and add a protective sleeve, which can then be covered with a plug. A 12 cm thick profile and technological characteristics of the profiles guarantee a casting pressure of 80 kN/m2.

The ability to install plywood with a plastic coating ensures high surface quality, durability and versatility of the system, and also significantly expands the scope of application, both on small and large construction sites.

Panel width	20 | 30 | 40 | 50 | 60 | 75 | 100 | 120 | 240 cm
Panel height	75 | 150 | 270 | 300 | 330 cm
Universal Panels	90x330 | 120x330 | 90x300 | 120x300 | 90x270 | 90x150 | 120x150 | 90x75 | 120x75 cm
Profile thickness	12 cm
Molding surface	Laminated plywood 18 mm (min. density 280 g/m2)
Max. concrete pressure	80 kN/m2
Corrosion protection	Painted (powder coated) or fully galvanized profile and fasteners
Standard mount	Type Clamp
Special mount	Compensating Clamp
Inside corner	30/30 cm
Articulated angle	30/30 cm (angles from 60о to 175о)
Outer corner	12/12 cm
Montage/Demontage	t = 0,4 - 0,6 h/m2